Manufacturing Jigs
Telink provides full set of hardware to be used on the manufacturing line of the end products. Customers can select the appropriate jigs according to the production stage and scale.
Overview
→
| S/N | Description | IC | Document |
|---|---|---|---|
| TLSRGSOCMT1X1PRE-KIT | 1x1 Jig Pretest + Firmware Burning This kit contains one jig EVK board and other hardware. It can be used to set up a 1x1 jig, which can test and program one DUT at a time. |
TLSR8, TLSR9 | User Manual |
| TLSRGSOCMT1X6PRE-KIT | 1x6 Jig Pretest + Firmware Burning This kit is comprised of six 1x1 Jig EVK kits. It can be used to test and program six DUTs at a time. |
TLSR8, TLSR9 | User Manual |
| TLSRGSOCMT3VL | Jig EVK Board It is one jig EVK board only. It can be used to replace a damaged one in 1x1 jig kit or 1x6 jig kit. |
TLSR8, TLSR9 | |
| TLSRGSOCMT3VH | 3V High-Precision Jig EVK Board It is one high precision current measurement jig EVK board with uA level accuracy. |
TLSR8, TLSR9 |
Picture
→
